Skip to main content

Shop in-store for even more deals!

Summit Bicycles Logo

Shop in store for even more deals we can't advertise!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Bottom Brackets

$379.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BSA for SRAM DUB Road comes in two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BSA - Opening diameter: Threaded - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacertube
$379.00
BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, found on cranks from Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. 24mm spindles easily fit through the shell and allow for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet
$379.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The EVO386 for SRAM DUB Road comes in two versions. The first version uses our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: EVO386 - Opening diameter: 46mm - Shell width: 86.5mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 2 x 3mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
$379.00 - $459.00
Italian-threaded bottom bracket shells are typically found on Italian-brand road bikes. The shell measures 70mm wide and has a 35mm inner diameter. This kit has all the pieces necessary to install 24mm diameter cranks, such as those from Shimano, FSA, and others into an ITA shell. CeramicSpeed bearings are pressed into threaded cups, then those cups are threaded into the frame. You choose whether you want yours equipped with Standard or Coated Bearings. Super-round, super-smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag. ITA BBs, thanks to the popularity of Italian road bike design, still have a following. The drive-side cup needs to be properly secured, but once that's done, the system is excellent. 24mm cranks work better when mated to our bearings. To make your bike as efficient as possible, you must reduce mechanical drag. Bottom brackets have a measurable effect on speed. CeramicSpeed balls are 100% smoother and 15% harder than the ceramic competition. They run on smoother races, too. That means our Standard Bearing BBs have 75% less drag compared to typical bottom brackets. And, the bearings last at least 3x longer than other bearings. These bearings come packed with All Round Grease. If you want less drag and are riding in cleaner environs, install lowest drag TT and Track Grease. If you're riding in wet conditions, more durable LongLife Grease can be put in. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of All Round grease - Sticker sheet
$379.00 - $459.00
The PF30 standard is widely used. To make it compatible with Shimano and other 24mm diameter cranks, as well as improve the system, select this bottom bracket. The package comes with two cups and CeramicSpeed Bearings installed. The cups have extended inner sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system while also eliminating spindle rub on internal cables. The cups mate with 24/22mm crank spindles. There are two bearing options. Both Standard and Coated Bearings feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life. The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer. The CeramicSpeed Coated Bearings last even longer and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings. All Round Grease is installed in the bearings. It can be replaced for lower-drag TT and Track Grease or higher-durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet
$459.00
This bottom bracket is perfect for when you have a PF30, BBright, or 386EVO shell frame and want to install a crank with a 30mm spindle into the frame. All these frame standards have a 46mm inner diameter and smooth insides, though the widths vary from 68mm to 86mm. This bottom bracket features nearly zero loss of power due to friction, thanks to the CeramicSpeed's incredibly efficient bearings. Choose either our Standard or Coated Bearings—both have super-round, super-smooth CeramicSpeed balls rolling on hardened-steel races. The Coated version has a metallic coating laid onto the races, making them even harder and smoother and resulting in longer life and lower drag. They come installed in cups. 30mm spindles on cranks are increasingly popular because of the high stiffness and low weight. 46mm inner diameter bottom brackets are popular for the freedom they offer designers in building frames. Because of the variety of widths, the cups here extend into the shell and come with a telescoping spacer tube to further seal and stiffen the system. The bottom bracket is already stiff thanks to hard ceramic bearings and hardened-steel races. Thanks to CeramicSpeed, it also generates nearly zero drag. Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction versus conventional BBs. The bearings also last at least 3x longer than other bearings. You can change the grease to fine-tune your BB's performance characteristics. TT and Track, All Round, and LongLife are greases CeramicSpeed designed. The first has the least drag, while the last is the most durable. All Round, in the middle, comes standard in road bearings. In The Box - 2 cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - Spacer tube - 10ml All Round Grease - Sticker sheet
$479.00
These bottom brackets are equipped with hand-built coated bearings specially developed for off-road performance that offer extreme durability and feature a unique design for SRAM DUB 28.99mm cranks. Coated bearings utilize the highest-quality CeramicSpeed ceramic balls, running on hardened-steel races with a 3-micron-thick metallic coating that makes the races corrosion-resistant, harder, and smoother, increasing service life and reducing friction. - This product has a unique design specifically for SRAM DUB 28.99mm cranks - Native fit frame interface and no plastic adapters or excess spacers - This design features a custom integrated dust cover for maximum durability In the box: - 2 CeramicSpeed Bearings - 2 dust covers - Plast sheet - 1 x 3mm spacer - 2 x 1mm spacers - 10ml syringe of CeramicSpeed Long Life Grease - Sticker sheet
$479.00
BSA is equivalent to English threading. English threading on MTBs mean a 73mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others. Choose between two bearing types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. For MTBs, English threading, thanks to history, is pretty much the one threaded standard. It works great. 24mm spindles easily fit through the shell, allow for large bearings to be employed in the outside cups. What's more, they rarely creak and seal up well. Lots of things slow bikes down; bearings shouldn't be among them. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. The bearings last at least 3x longer than other bearings. Coated bearings have even less drag. These bearings come packed with LongLife Grease, best for muddy conditions. For less drag when riding in cleaner environs, you can coat the bearings with either All Round Grease or lowest drag TT and Track Grease, which is designed for clean conditions. In The Box - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of LongLife grease - Sticker sheet
$479.00
BSA is equivalent to English threading. English threading on road bikes mean a 68mm-wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. English threading is easy to work with, and 24mm spindles easily fit through the shell, allowing for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet
$479.00
The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet
$21.00
Chris King's Bottom Bracket Conversion Kits make sure that you can match up your frame with your cranks, all while enjoying the super smooth performance of King's in-house stainless steel bearings. These adapters are compatible with frames that feature a Press Fit 30 bottom bracket.
$178.00
Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #1 is designed to mate the ThreadFit 30 bottom bracket with a DUB MTB 28.99mm spindle - Spindle Interface Type: SRAM DUB - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
$178.00
The Chris King ThreadFit T47 30x Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 30x fits 68mm and 73mm shell widths with 30mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #5 is designed to mate the ThreadFit T47 30x bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , e*Thirteen P3 Connect , Rotor 3D+ , Zipp Vuma - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47
$212.00
Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #3 is designed to mate the ThreadFit30 bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , e*Thirteen P3 Connect , Rotor 3D+ , Zipp Vuma - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
$212.00
The Chris King ThreadFit T47 24i Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24i fits 86mm and 92mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24i bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 86 , 92 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47
$212.00
The Chris King ThreadFit T47 24x Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24x will fit 68mm and 73mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24x bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47
$9.99
Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi
$44.99 $59.99 25% Off
Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g
$19.00
FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English
$28.00
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)
$29.00
The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces. - Alloy cups - Double "snap" seals for water and dirt protection - Spindle Interface Type: Square Taper JIS
$30.75 $41.00 25% Off
This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles. - Sealed bearings - Die-cast then CNC machined alloy bearing cups - Composite Di2-compatible adjustable center sleeve
$31.00
Bottom brackets from FSA for non-threaded applications. - 24mm spindle compatibility - Stainless steel bearings - Spindle Interface Type: FSA MegaExo - BB Shell Width: 92mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB92
$33.00
Bottom brackets from FSA for non-threaded applications. - Spindle Interface Type: 386 EVO - BB Shell Width: 86mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB86
$33.00
FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles. - Die cast and CNC-machined alloy bearing cups - 19mm I.D. - BB86/92 compatible - BB Shell Width (mm): 92 - Bottom Bracket Shell I.D.: 41
$36.00
- BBright Bottom Bracket to Mega Exo Carbon Crank BB-PF79 (EE086) - Spindle Interface Type: FSA MegaExo, Shimano Hollowtech II - BB Shell Width (mm): 79 – 84.5 - Bottom Bracket Shell I.D.: 46 - BB/Frame Interface: BBright Direct Fit
$37.60 $47.00 20% Off
Bottom brackets from FSA for non-threaded applications. - Spindle Interface Type: FSA MegaExo 19 - BB Shell Width (mm): 86 - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB86
$41.00 - $61.00
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)
$46.00 - $199.99
- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options
$50.99 - $59.99
ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA. - Forged, hollow chromoly spindle with titanium nitride coating - Integrated, large ball bearing design - Cold-forged aluminum cups - Includes crank bolts
$59.00
- Die Cast then CNC-machined alloy bearing cups - Composite DI2 compatible adjustable center sleeve - 100mm for Fat Bikes - For use with 100mm MTB NBD MegaExo cranksets - Spindle Interface Type: FSA MegaExo - BB Shell Width (mm): 100 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
$61.00
Run your 386EVO crank with your frame that is designed for BB86 Shimano Pressfit bottom brackets with this FSA bottom bracket. - 2 lines of bearings on each side
$61.00
- Enables the use of a BB386EVO (30mm spindle) crankset on a 68mm English threaded frame
$133.60
• CNC machined in Barnoldswick, England • Custom stainless steel bearings by INA of Switzerland are double sealed with a non contact free running Labyrinth seal with aluminum center tube • Compatible with Shimano Mountain Hollowtech II and Race Face X-Type
$19.99
High performing square bottom bracket interfaces with English frames. - Fits square-taper spindle cranksets - Alloy adjustable cups - Includes 2 axle bolts
$25.49
- Designed for fat tire bikes - Chromoly spindle - Sealed bearings
$53.39
Pedal smoothly and steadily with Origin-8's Torqlite Square-Taper Bottom Bracket. The forged aluminum body and cups are light and tough, the CNC'd hollow-chromoly spindle is stiff and shaves more grams, and the sealed bearings are super smooth and durable.
$53.99 - $59.99
Forged and CNC machined AL6061 cups - Double sealed replaceable bearings - Fits 68mm and 73mm shell widths - 1.37" x 24T English thread - Alloy spacers included for chainline adjustment - Anodized and laser etched finish
$59.99
Aluminum cups - Fits BB86 and BB92 - Includes shims for GXP - SHIMANO Equivalent SMBB-72-41B / SMBB-71-41A - Shell: 86mm - Spindle Type: HT2/GXP - Weight: 103g
$59.99
Origin8's Revolvr BB386 Outboard Bottom Bracket features forged and CNC-machined AL6061 thread-in cups for a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing BB30 Wide or BB386 30mm spindle cranks into BSA threaded frames - For use with 30mm diameter cranks with a spindle length of at least 104mm - Shell: 68mm x 33.6-33.9mm - Interface: ISO/English or BSA Threaded (1.37" x 24TPI) - Spindle Type: BB30 Wide/BB386 30mm - Cup Material: AL6061 - Weight: 120g
$62.99
Origin-8's BB30 Adapters allow you to convert your bicycle so that you can install a SRAM GXP or Shimano Hollowtech II BB30 crankset with a 24mm-diameter spindle. These Adapters include machined-aluminum cups, super-smooth and durable sealed bearings, shims and C clips.
$65.99
Origin-8's ISIS Bottom Bracket is everything you need to get your wheels rolling. It features a steel body and hollow-chromoly spindle that adds stiffness and cuts down on weight. The sealed bearings are super smooth and durable, and this fine BB is available in 3 sizes with a 68mm shell.
$69.99
- Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are serviceable - Designed for installing SRAM DUB 28.99mm spindle cranks into BSA threaded frames - Shell: 68/73mm - Interface: ENG - Spindle Type: DUB - Cup Material: AL6061 - Weight: 100g
$79.89 - $84.99
- Replaces standard BB90/95 press-in bearings commonly found on Trek bicycles with a solid, unified thread-together bottom bracket interface - Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - OS versions are designed for use in frames with worn-out, oversized bottom bracket shells - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are serviceable - Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles - Requires a special tool for installation (P/N# 610756)
$84.99 - $93.99
Origin8's BB386 Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Its hybrid AL6061/Nylon fiber cups offer a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing Shimano HollowTechII 24mm or SRAM GXP 22/24mm spindle cranks into BB386 frames without the need for adapters - Shell: 86.5mm x 46mm - Interface: BB386 - Cup Material: AL6061/Nylon Fiber - Weight: 135g
$84.99
- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - OS versions are designed for use in frames with worn-out, oversized bottom bracket shells - Hybrid AL6061/Nylon fiber cups for a superior fit and noise free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles - Replaces all standard BB86/92 press-fit bottom brackets - Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups
$84.99
- Precision machined AL6061 cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed dual-row premium flanged bearings - Designed for installing SRAM DUB 28.99mm spindle cranks into BB86/92 frames - Shell: 86-92mm x 41mm - Interface: BB86/BB92 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061 - Weight: 90g
$84.99
Origin8's Revolvr BB86/92 Press-Fit Bottom Bracket features precision-machined AL6061 cups for a superior fit and noise-free operation. Low-friction dual seals protect the dual-row premium flanged bearings from harmful contaminants. - Designed for installing BB30 Wide, BB386, BB392, and other 30mm spindle cranks into BB86/92 frames - For use with 30mm diameter cranks with a spindle length of at least 104mm - Shell: 86-92mm x 41mm - Interface: BB86/BB92 - Spindle Type: BB30 Wide/BB386 30mm - Cup Material: AL6061 - Weight: 80g
$84.99
Origin8's Revolvr BB86/92 Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Hybrid AL6061/Nylon fiber cups offer a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. Models are available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles. - Replaces all standard BB86/92 press-fit bottom brackets - Shell: 86-92mm x 41mm - Interface: BB86/BB92 - Cup Material: AL6061/Nylon Fiber - Weight: 103g
$84.99
- Replaces standard BB90/95 press-in bearings commonly found on Trek bicycles with a solid, unified thread-together bottom bracket interface - Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are serviceable - Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles - Requires a special tool for installation (P/N# 610756)
$84.99
- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Designed for installing SRAM DUB 28.99mm spindle cranks into PF30 frames - Shell: 68/73mm x 46mm - Interface: PF30 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061/Nylon Fiber - Weight: 125g
$89.99
- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Designed for installing SRAM DUB 28.99mm spindle cranks into BB30 frames - Shell: 68/73mm x 42mm - Interface: BB30 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061/Nylon Fiber - Weight: 120g
$89.99
- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, or DUB spindle cranks into BB386 frames without the need for adapters - Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups - Shell: 86.5/92mm x 46mm - Interface: BB386/BB392 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061/Nylon Fiber - Weight: 135g
$93.99
Origin8's Revolvr thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life. Their hybrid AL6061/Nylon fiber cups deliver a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing Shimano HTII 24mm or SRAM GXP 22/24mm spindle cranks into BB30 frames without the need for adapters - Shell: 68-73mm x 42mm - Interface: BB30 - Material: AL6061/Nylon Fiber - Weight: 123g
$93.99
Origin8's Revolvr PF30 Outboard Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Hybrid AL6061/Nylon fiber cups provide a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing Shimano HollowTechII 24mm or SRAM GXP 22/24mm spindle cranks into PF30 frames without the need for adapters - Shell: 68-73mm x 46mm - Interface: PF30 - Cup Material: AL6061/Nylon Fiber - Weight: 138g
$93.99
Origin8's Revolvr PF30/BB386 Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing BB30 or BB386 30mm spindle cranks into PF30 or BB386 frames without the need for adapters - Shell: 68-86.5mm x 46mm - Interface: PF30/BB386 - Spindle Type: BB30/BB386 30mm - Cup Material: AL6061/Nylon Fiber - Weight: 120g
$93.99
- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - OS versions are designed for use in frames with worn-out, oversized bottom bracket shells - Hybrid AL6061/Nylon fiber cups for a superior fit and noise free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Designed for installing BB30 Wide or BB386/BB392 30mm spindle cranks into PF30 or BB386/BB392 frames - Note: Spindle length must be 104mm or longer when used in a 68mm wide shell, 108mm or longer when used in a 73mm wide shell - Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups - Shell: 68-92mm x 46~46.1mm - Interface: PF30/BB386/BB392 - Spindle Type: BB30 Wide/BB386/BB392 30mm - Cup Material: AL6061/Nylon Fiber - Weight: 120g
$139.99
Maximize your pedaling efficiency with Origin-8's Torq Lite Outboard Ceramic Bottom Bracket. It features CNC'd 6061-aluminum cups with super-smooth and durable double-sealed ceramic bearings and stainless-steel races. It is made for 68mm, 70mm or 73mm bottom brackets and can be used in road or mountain bikes. It comes with spacers and has an anodized and laser-etched finish, too.
$150.00
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The classic version features full-body, aluminum construction across the shell for maximum surface area friction and additional value. The Bushnell Fat Bike Eccentric Bottom Bracket is designed for the 100mm shells in most fat bikes. - Accepts English threaded bottom bracket cups - Classic, full-body design - Diameter of part - 2.118 inches (53.78mm) - Fits BB shells from 53.8 ~ 54mm I.D. without shim - Fits BB shells up to 100mm width
$8.99 $11.99 25% Off
Race Face Cinch bottom bracket spacer kit for BB30/PF30 bottom brackets.
Page 1 of 5 Next page