Chainrings

A QUICK-CHANGE DIRECT MOUNT CHAINRING SYSTEM Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler. - Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring - Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding - Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain - 4 Ring Sizes (28, 30, 32, 34T) - 2 Profiles - both Round and Oval - 12 speed ring designed to work with all 10, 11, and both Shimano Hypergilde+ 12 and SRAM Eagle 12 speed chains. - Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire SPECS - Material: 7075-T6 Aluminum

- Narrow-wide teeth prevent unwanted chain drop - Subtly slotted bolt holes allow for a perfect fit with both 94 and 96 BCD symmetrical crank arms - Perfect 49mm chainline with 2mm shims included for a quieter drivetrain improved chainring wear and best no drop performance. - Reuse your existing 8-10mm long ring hardware. No new bolt packs required. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced wide tooth design provides maximum ring durability when run without a bash guard. - Made from hard wearing 7075-T6 aluminum plate. *Shims - Included with rings. For 2x crank conversions; shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions; shims under the bolt heads allow reuse of your 3x hardware. SPEC - Material: 7075-T6 Aluminum - Weight: 43g (30T), 49g (32T), 58g (34T) - Chainline: 49mm Compatible with: - 9, 10, 11 Speed SRAM & Shimano, and 12 Speed SRAM Chains - All symmetrical 4 arm 94 mm BCD cranks (SRAM XO1, X1, GX), all symmetrical 4 arm 96 mm BCD cranks (Shimano compact triple M782, M672, M622, M612) SRAM chainrings usually have the BCD laser etched on the back of the ring If your Shimano 3x crank has a 30T middle ring this is the 1x ring you need. Shimano crank part numbers are usually laser etched on the pedal end of the crank on the back face. NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - Shimano Deore M5100-1 Cranks

OneUp your complete drivetrain with our new Narrow Wide Chainrings. - Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit - Perfect chainline with 2mm Shims included with 32T and 34T rings (30T rings have built in offset). For a quieter drivetrain with improved chain wear and best drop performance. - Reuse your existing 8-10mm long ring hardware. No new bolt packs required, saves you $15. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from hard wearing 7075-T6 aluminum plate - 30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible on a 104 BCD crank (loose shims are only included with the 32T-36T sizes). *Shims - Included with 32T and 34T rings. For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions, shims under the bolt heads allow reuse of your 3x hardware - No new bolt packs required! SPEC - Material: 7075-T6 - Weight: 40g (30T), 44g (32T), 54g (34T), 2g (4x shims) - Compatible with: 9, 10, 11 and 12 Speed SRAM Chains and 104 BCD cranks (not compatible with 12 Speed Shimano/Hyperglide Chains) - Colors: Black, Green - Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm