Other

Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit - 21T Front Drive Cog - 22T Rear Transfer Cog - 24T Axle Drive Cog - Cable stop required when installing on Sun Atlas Industrial Cargo Trike

Your Sun Traditional Trike can be made even more useful with the addition of twist-shift 7-speed gearing and a powerful rear disc brake! This complete kit includes all necessary components for converting your 2016 or later Sun Traditional Trike to a 7-speed derailleur system with a mechanical disc brake, giving you an easy and efficient ride up and over any type of hill and smooth, safe stopping on the other side. The parking brake feature on both front and rear brake levers allows you to lock either or both brakes simultaneously to load or unload with ease. Simple and common parts mean easy maintenance for years of use. Kit includes all components including items such as cable ties and other small parts for an original-equipment look. - Sun Race M30 7-speed twist shifter - Sun Race M40 7-speed direct-mount derailleur - Sun Race M3 7-speed freewheel (13-15-17-19-21-24-28T) with 15mm trike axle adapter - 36T x 1/2" x 3/32" chainring - K.M.C. Z51 1/2" x 3/32" chain - Promax DSK-300 mechanical disc brake and mounting hardware - Promax 160mm stainless steel rotor with 15mm trike axle adapter - Promax BL-46K 4-finger brake lever with parking lock - High-density black foam grips, 92mm left side / 130mm right side - Kit includes all parts needed for complete installation - Kit only compatible with 2016 or newer Sun trikes with rear derailleur and disc brake mount on rear unit

RockShox AXS Remote for AXS dropper seatpost.

- Fastener kit with an assortment of nuts, bots and washers. - 475 Pieces, 18 Different Parts, Three Bolt Styles in Lengths 8 to 30mm - Assortment of commonly used bicycle fasteners

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm

RockShox Motion Control DNA Compression Dampers

Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.

Replacement CSU Components for RockShox

Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.

Cassette spacers, bottom bracket spacers and hardware for HollowtechII, GXP, BB30/PF30. - Comprehensive shop kit for bottom bracket and cassette/freewheel spacing needs - 120 pc. kit in durable plastic storage box

The Profile Design Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing. There are 80 distinct position options achievable just by moving the armrests. As a clip-on bar it is also possible to adjust the extension width, length, and tilt easily. - 50a extensions offer a 50deg ski bend shape with a 7.5mm (per side) lateral shift - Extensions 340mm long and can be cut to size to suit nearly every rider - Bracket: Flip - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 112mm to 280mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: 40mm - Weight: 587g

RockShox Boxxer Solo Air Assembly

RockShox XLoc Parts

Minimalist double butted aluminum extensions designed for draft legal Triathlons (ITU and UCI approved) Composite adjustable armrests, a one piece composite aero bridge and molded armrest pads

The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is constructed using carbon fiber, allowing for even more complex shaping and lighter weight. - Compatible with all 22.2mm clip-on systems - Material: Unidirectional carbon - Internal cable routing - Length: 380mm

The Airstryke II takes the features of the ever popular Airstryke and adds an expanded fit range and more comfortable armrest. The flip up bracket and classic shape are retained. Performance The Airstryke II is intended to allow riders to add aerobars to their road or adventure bike without sacrificing the ability to hold the bars close to the stem. The comfortable grip angle and smoothly curved armrest offer a relaxed position for long days in the saddle. Fit Data - Armrest Offset: -85mm to 17.5mm in 7.5mm steps - Armrest Width: 131mm to 298mm in 18.5mm steps - Armrest Stack: 40mm Origin As one of the most popular model in the history of aerobars it seemed appropriate to update the much loved Airstryke with our new generation fit range and comfort focused armrest. We didn't want to change the elements that have made the bar so successful and the changes made just enhance the adjustability and comfort. - Bracket: L2 Flip-Up - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Armrest - Armrest Stack: 40mm - Reach: -85mm to 17.5mm in 7.5mm steps - Extension Adjustment: 150mm (center of basebar - end) - Armrest Width: 155mm - 203mm - Weight: 592g

The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: 60mm to 70mm in 5mm increments (with aftermarket Riser Kit) - Extension length and rotation can be easily adjusted using the top bolt - Weight: 545g

Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine tune a riders position or match the position from their previous aerobar or bike. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g

RockShox 35mm Seal Kit for repair and maintenance of Rockshox suspension forks.

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 30mm - Outer Diameter: 42mm - Width: 7mm

FSA Service Parts for BB30 Frames

Replacement lever blades for Magura disc brakes

The HC97 Compression System replaces the stock compression assemblies found in the popular Rock Shox PIKE, Lyrik, and BoXXer forks equipped with Charger 2 and 2.1 dampers. The damper has been designed to increase traction and small bump sensitivity with higher levels of stability and control, all while giving riders more external fine-tuning control over their front suspension. - Shim-Less High Speed Compression Valve for seamless and smooth damping force in consecutive bumps providing a controlled and compliant ride - Pressure Balanced Symmetrical flow rate for increased traction and control

Get ready to get fast with Vision's Team Clip-Ons. The butted-aluminum J-bend extensions are light and stiff, plus they feature fully internal cable routing. You'll also love the 3-position carbon arm rests with supportive foam pads for dialing in your ideal aero position.

105 piece assortment of 1-1/8-inch aluminum headset spacers. Kit includes: - 1.5mm (Silver) qty. 15 - 2.5mm (Silver) qty. 15 - 5mm (Silver) qty. 15 - 7.5mm (Silver) qty. 5 - 10mm (Silver) qty. 5 - 1.5mm (Black) qty. 15 - 2.5mm (Black) qty. 15 - 5mm (Black) qty. 15 - 7.5mm (Black) qty. 5

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 12mm - Outer Diameter: 24mm - Width: 6mm

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit w/ Bearing

RockShox Motion Control Compression Dampers

Shop kit of bearing retainers for loose-ball headsets, hubs and bottom brackets. - Bottom bracket: 1/4x9=12; 5/16x9=16 (#64); 5/16x10=16 (#66), 5/16 x 12 (Qty 4) - Bearing retainer assortment in all the popular sizes for headsets, hubs, and bottom brackets; includes plastic organizer - Hubs: 3/16x7=8; 1/4x7=16 - Headset: 5/32x22=8; 5/32x16=8; 3/16x16=8; 5/32x20=24

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

Complete assemblies of remotes, hoses and fittings for Reverb and Reverb Stealth.

- Includes barb and olive - Brake Lever Clamp: 22.2mm, MMX compatible - Lever Blade Material: Carbon - Reach Adjust: Tool-free

Replacement lever blades for Magura disc brakes

Paul's dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. - Dual stacked sealed cartridge bearings in the pivot for zero slop and long (serviceable) life - Pinch bolt and cable head recess allowing you to run the cable in either direction - Hinged clamp so you can install it without removing the grip - Barrel adjuster for fine tuning the cable tension

The bracket is forged to create a sleek low stack design. It offers significantly lower stack than the rest of the Sonic range while retaining the extension reach and width adjustment options. It is compatible with a 31.8mm basebar, our riser kits, and 22.2mm extensions in aluminum and carbon. - Materials: Forged 6061-T6 AL - Stack Height: 23.5mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 352g

Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

RockShox Rear Shock Parts

Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

The ProRate Spring is designed to fit both Jade and Jade X rear shock models, offering the longest spring life of any lightweight steel spring on the market. - Up to 125lbs. of progressive rate coil; great for big-hit support, aggressive riders, or linear linkage designs - Lightweight and high-quality Japanese steel - Retains spring-rate up to 1,000,000 compressions

38 Air Shaft Assembly for Fox suspension forks.

Have a current Bomber Z1 but missing that Coil Spring feel? Or, maybe you have a Bomber Z1 Coil already and want to customize its ride. Look no further. With this conversion kit, you can now convert your Bomber Z1 air fork easily to the Z1 Coil. Buy this upgrade kit and follow the install instructions (or have your bike shop swap it out for you) and you, too, will be riding the buttery-smooth Z1 Coil in no time. NOTE: To do the conversion, you will also need to purchase the Bomber Z1 Coil Conversion Spring

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

RockShox Rebound Dampers and Seal Head Assemblies

- Internal junction-A with two e-Tube ports - Externally facing charging port eases charging, especially for internal batteries - Mounts in road bar end or in frames with an integrated mounting point - For easier cable routing, use along with EW-JC130 three-way e-Tube cable

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 26mm - Width: 5mm

The absoluteBLACK Oval Bash Guide is designed specifically for oval chainrings, keeping your chain secure at every single crank position. This bash guard system provides exceptional durability with maximum weight savings thanks to intelligent design and titanium hardware. - Fully compatible with oval chainrings - The adjustable 48-53mm chainline makes it compatible with most bike setups - Includes titanium hardware and spacers

Enduro Zero Pulley Assemblies use grade 5 ceramic bearings. Races are won and lost by derailleur pulley drag. - VV" type 2-lip non-contact Silicone labyrinth seals - Nylon/graphite retainer

RockShox Super Deluxe Coil Damper Shafts for service and repair.

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 36T