Free Shipping on Orders Over $50 Within Continental USA

Free Shipping on Orders Over $50 Within Continental USA

Filter By:

Stages Cycling Power Meters

(8 matches)

The Summit Advantage!

Exceptional Service and Attention to Detail Learn More

4 Locations To Serve You!

All with great staff to meet your needs Locations
Stages Cycling Shimano 105 5800
$397.49 - $529.99 $529.99 Up To 25% Savings
The Stages Power meter is built on to a non-drive FC-5800 crank arm specifically to pair with Shimano's 105 5800 crank. This Stages Power meter is slimmer, and up to 28% lower profile than their original meter. It's sleeker by way of a 17% reduction in frontal area, and Stages also made it stronger. The housing design increases the strength of the battery door and housing connection by 200%t over the previous design. This Shimano 5800 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. - Accuracy: ± 2% - Weight: Only adds 20 grams to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in our Support section - Crank Compatibility: All Shimano Hollowtech II road cranks - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others
Stages Cycling Shimano XT M8000
$434.99 - $579.99 $579.99 Up To 25% Savings
For the dirt heads out there, Stages offers a power meter as a non-drive crank arm for existing Shimano XT M8000 (Single/Double/Triple) cranks. The new Stages Power meter is slimmer, and up to 28% lower profile than the original meter. It's sleeker by way of a 17% reduction in frontal area, and they've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200% over the previous design. - Accuracy: ± 2% - Power meter housing: new low profile design, with new door interface - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Stages Support section - Device Compatibility: ANT+, Bluetooth Smart Ready Software - Compatibility: Training Peaks, Strava, Garmin Training Center and others
Stages Cycling Carbon for FSA 386EVO
$472.49 $629.99 25% Savings
The Stages Power meter is built to the proprietary Stages Power carbon left crank arm. The full carbon fiber Stages Power meter and crank arm is directly compatible (no additional components needed) with 386 EVO drive side cranks. It can be retrofit to many SRAM and Truvativ BB30 drive side cranks using one of the Stages 30mm Spindles (sold separately). - Accuracy: ± 2% - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 - 2500 - Cadence range (rpm): 20 - 220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Stages Support section - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others * This Stages Power meter will not fit SRAM's GXP bottom bracket interface.
Stages Cycling Shimano Dura-Ace 9000
$487.49 $649.99 25% Savings
The Stages Power meter is built on to a non-drive FC-9000 crank arm specifically to pair with Shimano's Dura-Ace 9000 crank. This meter has been proven, as it was ridden to victory in the 2015 Tour de France by Team Sky. This Stages Power meter is slimmer, and up to 28% lower profile than our original meter. It's sleeker by way of a 17% reduction in frontal area, and Stages also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200% over the previous design. This Shimano Dura-Ace 9000 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. - Accuracy: ± 2% - Power meter housing: new low profile design, with new door interface - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in our Support section - Device Compatibility: ANT+, Bluetooth Smart Ready Software Compatibility: Training Peaks, Strava, Garmin Training Center and others
Stages Cycling Stages Power Meter - Shimano Dura-Ace 9000
$487.49 - $1,349.99 $649.99 - $1,349.99 Up To 25% Savings
Stages Cycling's Stages Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. It allows every rider, in every discipline, power-based (also called watt-based) training performance. With advanced technology accurate to +/- 2%, ANT+ and Bluetooth Smart transmitting, active temperature compensation, and mere 20 grams of weight, the Stages Power meter is perfect for any cyclist whether looking for their first power meter or a savvy power-training expert. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. This Stages Power Meter model is available as a Shimano Dura-Ace 9000 replacement left (non-drive) crankarm (shown) or integrated into the crankarm on a complete Shimano Dura-Ace 9000 Standard (53/39-tooth chainrings) or Compact (50/34) crankset (bottom bracket sold separately).
Stages Cycling Shimano Ultegra 6800
$549.99 - $579.99
The Stages Power meter is built on to a non-drive FC-6800 crank arm specifically to pair with Shimano's Ultegra 6800 crank. The new Stages Power meter is slimmer, and up to 28% lower profile than the original meter. It's sleeker by way of a 17% reduction in frontal area, and they've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200% over the previous design. This Shimano Ultegra 6800 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. - Accuracy: ± 2% - Power meter housing: new low profile design, with new door interface - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Support section - Device Compatibility: ANT+, Bluetooth Smart Ready Software - Compatibility: Training Peaks, Strava, Garmin Training Center and others
Stages Cycling Shimano Ultegra 6800 Crankset Power Meter
$637.49 $849.99 25% Savings
The Stages Power meter is built on to a non-drive Shimano Ultegra 6800 crank arm specifically and paired with Shimano's Ultegra FC-6800 drive side crank. This Stages Power meter is slimmer, and to 28% lower profile than the original meter. It's sleeker by way of a 17% reduction in frontal area, and they've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200% over the previous design. This Shimano Ultegra 6800 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. Bottom bracket not included. - Accuracy: ± 2% - Power meter housing: new low profile design, with new door interface - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Support section - Device Compatibility: ANT+, Bluetooth Smart Ready Software - Compatibility: Training Peaks, Strava, Garmin Training Center and others
Stages Cycling Stages Power Meter - Shimano Ultegra 6800
$799.99 - $1,099.99
Stages Cycling's Stages Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. It allows every rider, in every discipline, power-based (also called watt-based) training performance. With advanced technology accurate to +/- 2%, ANT+ and Bluetooth Smart transmitting, active temperature compensation, and mere 20 grams of weight, the Stages Power meter is perfect for any cyclist whether looking for their first power meter or a savvy power-training expert. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. This Stages Power Meter model is available as a Shimano Ultegra 6800 replacement left (non-drive) crankarm (shown) or integrated into the crankarm on a complete Shimano Ultegra Standard (53/39-tooth chainrings), Compact (50/34) crankset, or Mid-Compact (52/36) crankset (bottom bracket sold separately).
Page 1 of 1