Skip to main content

Shop in-store for even more deals!

Summit Bicycles Logo

Shop in store for even more deals we can't advertise!

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Surly

The Summit Advantage!

Exceptional Service and Attention to Detail Learn More

4 Locations To Serve You!

All with great staff to meet your needs Locations
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$4.00 - $7.00
You can proudly display these Surly Logo Stickers just about anywhere they'll fit. They comes in three sizes to meet a wide range of sticking needs.
$4.00
- Replacement part for Surly hubs.
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
$5.00
Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.
$5.50
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
$6.00
Replacement dropout screws for the Surly Cross Check. - Bolt length: 40mm
$6.00
- Surly Chain Tensioner part
$6.00
Replacement dropout screws for the Surly Straggler. - Bolt length: 40mm
$6.00
- Replacement slider for the Surly Tuggnut and Snuggnut
$6.00
- Replacement thumb screw for the Surly Tuggnut/Snuggnut
$8.00
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
$8.00
Surly's Junk Straps can secure almost anything to almost anything else. Essentially an extra long toe strap, they're easy to use and store. And, trust us, these handy straps will get used often.
$8.00
Surly Trailer Parts
$10.00
Special tools for building Surly Fat Bike wheels. - 56mm-wide spacer aids in dishing and truing Moonlander offset wheels - 35mm-wide spacer aids in dishing and truing Pugsley offset wheels
$10.00
The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap
$10.00
- Replacement part for Surly hubs
$11.00
Extend the life of your Dummy bags with this replaceable wear patch.
$12.50 - $25.00
Surly Front Rack Hardware
$13.00
Surly Surly Big Dummy Frame Protective Plug Insert. - Notice the tapered end of each plug, if the end of a tube is dented, tap the protective plug into the tube with a soft hammer to round the tube out - Designed to prevent damage to the front bridge tube while frame is being shipped - Doubles as a tool to help round out any damaged bridge tubes or upright tubes during use of the bike - The diameter of the plug is designed to round it out to the correct diameter so that it receives accessories properly
$15.00
This fine pair of Surly 10/12 Adapter Washers is designed to adapt any 135, 170, or 190mm O.L.D. QR axle hub with a 142, 177 or 197mm spaced thru-axle frame. Make sure the QR axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
$15.00
The Surly Born to Lose Water Bottle offers premium real estate for your refreshment of choice. Shielded from unwanted odors, flavors, mold, and stains, your water won’t taste like whatever else you put in there last time. Available in 22 oz. and 26 oz. sizes
$15.00
These two black plates fit nice and snug between the chainstays of the newly redesigned Disc Trucker (2020 and newer), allowing you to bolt on the kickstand of your choice without gravely injuring your frame. Our other silver-colored Kickstand Plates remain the best option for legacy Trucker frames, so please don’t use the old plates with the new bike or the new plates with the old bikes. Normally we don’t like to tell people how to use our stuff, but in this case we have to take… a stand. - Allows use of any kickstand while protecting chainstays from damage - Includes two plates to protect the top and bottom of the chainstays - Compatible with 2020 and newer Disc Trucker frames
$15.00
Keep yourself hydrated during your next interplanetary excursion with our Intergalactic Water Bottle. Available in 22 oz. and 26 oz. sizes, it'll store your liquids while resisting stains, odors, and mold.
$15.00
Surly made these handy plates for use with either the Long Haul or Disc Trucker frames, and only the Long Haul and Disc Trucker frames. They are to be used with a bicycle kickstand to keep your bicycle upright while not moving as if by magic. The plates consist of two halves that, when clamped on your frame in conjunction with a kickstand, protect your chainstays from hamfisting by sandwiching the frame between the plates. Have you ever eaten a hamfist sandwich? They taste terrible, so avoid them like the plague. - Compatible with 2019 and older Long Haul and Disc Trucker frames
$15.00
The Surly Monster Squad Water Bottle offers 22 oz. of premium real estate for your refreshment of choice. Shielded from unwanted odors, flavors, mold, and stains, your water won’t taste like whatever else you put in there last time.
Page 1 of 7 Next page