Your Search: "tallboy"

The Downhiller's XC Bike The Tallboy has earned a loyal following amongst those who seek a go-to bike that will hold up to the relentless hammering of "power hour" hot laps or long days in the saddle harvesting the best trails. The highly-refined VPP™ suspension on the Tallboy combines pedaling efficiency and all-out bump-chomping prowess. If ever there was a gravity riders’ XC bike, the Tallboy is it. Fully dialed at every size: Proportional Geometry and frame stiffness tune Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to make sure everyone gets the same ride quality. Bigger riders mean greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes. GLOVEBOX: ALWAYS WITHIN REACH Place your ride essentials securely in the Tallboy's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand.

The Downhiller's XC Bike The Tallboy has earned a loyal following amongst those who seek a go-to bike that will hold up to the relentless hammering of "power hour" hot laps or long days in the saddle harvesting the best trails. The highly-refined VPP™ suspension on the Tallboy combines pedaling efficiency and all-out bump-chomping prowess. If ever there was a gravity riders’ XC bike, the Tallboy is it. Fully dialed at every size: Proportional Geometry and frame stiffness tune Chainstay length and seat angle are matched to the frame size (STA steepens and rear centre grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to make sure everyone gets the same ride quality. Bigger riders means greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes. GLOVEBOX: ALWAYS WITHIN REACH Place your ride essentials securely in the Tallboy's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand.

Fully dialed at every size: Proportional Geometry and frame stiffness tune. Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to ensure everyone gets the same ride quality. Bigger riders mean greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes. - VPP™ VPP™ stands for virtual pivot point - an engineering principal synonymous with high performance that spans from short travel platforms like the Tallboy right up to our DH World Cup-winning V10. - 120mm VPP™ Travel Some call 120mm "short travel", others call it all the travel you'll need. The Tallboy is an efficient XC pedaler with a geo and shock tune that makes it way more capable than the millimeters suggest. - Snappy Suspension The Tallboy has a lower starting ratio and an increased ending ratio of the leverage curve. This makes it really sensitive further into the travel and helps the bike ride higher in its stroke, producing a more responsive, snappy feel. - Bump Buster Significantly reducing peak anti-squat (over previous generations of the Tallboy), has improved both small bump sensitivity and square-edge compliance. And, because anti-squat values trend with ant-rise, we were also able to reduce the anti-rise to improve the braking sensitivity. - Glovebox: Always Within Reach Place your ride essentials securely in the Tallboy's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand.

The Downhiller's XC Bike The Tallboy has earned a loyal following amongst those who seek a go-to bike that will hold up to the relentless hammering of "power hour" hot laps or long days in the saddle harvesting the best trails. The highly-refined VPP™ suspension on the Tallboy combines pedaling efficiency and all-out bump-chomping prowess. If ever there was a gravity riders’ XC bike, the Tallboy is it. Fully dialed at every size: Proportional Geometry and frame stiffness tune Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to make sure everyone gets the same ride quality. Bigger riders means greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes. GLOVEBOX: ALWAYS WITHIN REACH Place your ride essentials securely in the Tallboy's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand.

Fully dialed at every size: Proportional Geometry and frame stiffness tune. Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to ensure everyone gets the same ride quality. Bigger riders mean greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes. - VPP™ VPP™ stands for virtual pivot point - an engineering principal synonymous with high performance that spans from short travel platforms like the Tallboy right up to our DH World Cup-winning V10. - 120mm VPP™ Travel Some call 120mm "short travel", others call it all the travel you'll need. The Tallboy is an efficient XC pedaler with a geo and shock tune that makes it way more capable than the millimeters suggest. - Snappy Suspension The Tallboy has a lower starting ratio and an increased ending ratio of the leverage curve. This makes it really sensitive further into the travel and helps the bike ride higher in its stroke, producing a more responsive, snappy feel. - Bump Buster Significantly reducing peak anti-squat (over previous generations of the Tallboy), has improved both small bump sensitivity and square-edge compliance. And, because anti-squat values trend with ant-rise, we were also able to reduce the anti-rise to improve the braking sensitivity. - Glovebox: Always Within Reach Place your ride essentials securely in the Tallboy's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand.

The Downhiller's XC Bike The Tallboy has earned a loyal following amongst those who seek a go-to bike that will hold up to the relentless hammering of "power hour" hot laps or long days in the saddle harvesting the best TRs. The highly-refined VPP suspension on the Tallboy combines pedaling efficiency and all-out bump-chomping prowess. If ever there was a gravity riders' XC bike, the Tallboy is it. Fully dialed at every size: Proportional Geometry and frame stiffness tune Chainstay length and seat angle are matched to the frame size (STA steepens and rear centre grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to make sure everyone gets the same ride quality. Bigger riders means greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes.

The Downhiller's XC Bike The Tallboy has earned a loyal following amongst those who seek a go-to bike that will hold up to the relentless hammering of "power hour" hot laps or long days in the saddle harvesting the best TRs. The highly-refined VPP suspension on the Tallboy combines pedaling efficiency and all-out bump-chomping prowess. If ever there was a gravity riders' XC bike, the Tallboy is it. Fully dialed at every size: Proportional Geometry and frame stiffness tune Chainstay length and seat angle are matched to the frame size (STA steepens and rear centre grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to make sure everyone gets the same ride quality. Bigger riders means greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes. SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself.

What It Is The G23 is the definition of a true gravel wheelset. At 330 grams, ENVE's lightest 700c tubeless rim accelerates quickly and ascends with ease. Armed against pinch flats with the patent-pending Wide Hookless Bead, the G23 is tough and relentless on road, path, or trail. The G23 is a 700c tubeless carbon clincher wheelset with a generous 23mm internal width, specifically conceived to meet the performance and ride quality demands of serious mixed-surface cyclists. Who It's For Created for those seeking to discover new experiences, new terrain, and new challenges. Built to reflect the versatility of today's gravel and mixed surface riders, these wheels will excite ambitious, daring, and indomitable riders everywhere. If your path leads to classics like Dirty Kanza, Landrun, Crusher in the Tushar, or a new wave of events like Grinduro or Lost and Found, the G23 is your wheel. Why We Made It There is a place between road and mountain that is open to discovery. Beyond the range of your trail bike or the capabilities of your road bike. Terrain littered with contradicting challenges and demanding requirements are at odds with the bikes and products available today. We built the new G23 to thrive in this new environment, because insights gained through building the world's best road and mountain bike rims told us that the perfect combination did not exist in our stable, or in our opinion, anywhere at all. The higher volume and lower pressures would demand MTB toughness and flat resistance, while big days and long miles would require the lightweight and efficiency of a road machine. Above all, the combination of rough and rigid would require a wheel with the ride quality to make those long miles enjoyable and multi-day treks possible.

What It Is The G27 is the G23's little big brother. Smaller in diameter and lighter in weight, the G27 is designed for the higher-volume tires demanded by many riders on rougher and looser terrain. At 320 grams, our lightest tubeless rim is 27mm wide and designed for tires marked 27.5 or 650B. Armed against pinch flats with the patent-pending Wide Hookless Bead, the G27 is at home off-road and capable on tamer stretches of singletrack. Who It's For Those seeking the challenge of drop-bar riding over more technical terrain that is typically frequented by mountain bikes will benefit from the additional air volume, durability, and anti-flat performance benefits provided by the G27. If your path leads you to rough roads, single tracks, and multi-day bikepacking adventures, the G27 may be for you. Why We Made It There is a place between road and mountain that is open to discovery. Beyond the range of your trail bike or the capabilities of your road bike. Terrain littered with contradicting challenges and demanding requirements are at odds with the bikes and products available today. We built the new G27 to thrive in this new environment because insights gained through building the world's best road and mountain bike rims told us that the perfect combination did not exist in our stable, or in our opinion, anywhere at all. The higher volume and lower pressures would demand MTB toughness and flat resistance, while big days and long miles would require the light weight and efficiency of a road machine. Above all, the combination of rough and rigid would require a wheel with the ride quality to make those long miles enjoyable and multi-day treks possible.

What It Is A revolutionary new disc brake-specific, aerodynamic, carbon fiber triathlon and time trial wheelset. The SES 7.8 Disc is both aerodynamically and structurally optimized for use with disc brakes. Who It's For Road racers and triathletes on modern disc brake-equipped aero road and triathlon bikes will benefit from the SES 7.8 Disc's reduced drag, light weight, and rim shape optimized for larger-volume road tires. Why We Made It Many modern road bikes are now equipped with disc brakes and the triathlon superbikes of tomorrow will be as well. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don't have to engineer a flat braking surface that must manage high temperatures from braking you can reduce the rim's weight, adjust the rim shape for improved aerodynamics, and provide better tubeless performance. Full Details Disc brakes are beginning to appear on the most aerodynamic bikes in the world and the SES 7.8 is ready. While most wheel manufacturers simply repurpose their rim brake-optimized wheel models into disc brake wheels by covering brake tracks with decals and adding disc hubs and more spokes, this leaves substantial amounts of performance on the table. Removing the constraints of a braking surface on the rim allow us to completely rethink the shape of the rim, and more specifically, the brake track area itself. The SES 7.8 Disc features patented SES rim curvature that has been optimized for disc brakes. Additionally, the SES 7.8 Disc carbon fiber clinchers and tubulars are much lighter because the material used for heat management has been eliminated. With no braking surface, the rim can be made more aerodynamically efficient and impact resistant. Finally, the SES 7.8 carbon clincher is tubeless-compatible and can also be run with standard inner tubes and tires. Like all of the current generation SES carbon clinchers and tubulars, the SES 7.8 Disc has been aerodynamically optimized around fast-rolling 25mm tires. ** These wheels will ship with the older, but still great, Mavid ID360 Hubs and J-Bend Spokes **

The Z32 wheelset includes our new and improved hub design, the "44" hub. A Beefier hub with bigger internals, featuring 108 points of engagement, help you generate more torque and transfer of power for out of saddle efforts. We upgraded to a 44mm ratchet rings and offer compatibility with Shimano Micro Spline 12-speed and Campagnolo Ekar 13-speed groupset. The "44" hub has been updated to include a slip-fit system to easily swap out end caps to accommodate, 15mm,12mm or QR axles, helping you "future-proof" your wheelset. The new Z32 features a 32mm deep matte alloy rim paired up with our Aero bladed PBO spokes for quick response and acceleration. This light weight alloy wheelset is great for climbing and sprinting. At 19mm internal, the Z32 wheels pair up great with 25-28mm tires for quick response and acceleration while maintaining rolling resistance down. * Custom and special colorways ships in 3-4 weeks.

Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 387mm - Weight: 373g (27.2mm); 378g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm

A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.

Silver anodized alloy rim w/ 32 holes - KT silver alloy road hub - Stainless steel spokes - QR wheel

A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications. - Blind bolt holes and shaping - Cold-forged and precision-machined - No-gap face plate and clamp area - Stainless hardware

- 2-piece forged alloy crank arms with steel chainring and bolts - Compatible with 10, 11, and 12-speed 1x drivetrain systems - Includes 24mm outboard BB with 3 spacers to fit 73 and 68mm BSA threaded frames - Includes 32T steel 1x chainring - Spindle Type: 24mm - Weight: 946g (w/BB)

It's fender season Our patented "No-Cut-Strut" bicycle fenders allow quick and simple installation to keep you dry and your bike clean. The premium aluminum construction provides added reliability and less vibration, while the sleek adjustable arms allow ultra-precise placement, so you can tailor the fit faster than you can pull a shot of espresso. Patented No-Cut-Strut alloy fenders provide durability and quick, easy installation. - Fully assembled fenders that install in minutes with only two tools - Durable no-cut alloy struts allow quick adjustment for proper tire clearance - Made of premium aluminum for added durability and reduced flexing and vibration - Double-back strut on rear fender adds support and stability - Stainless steel hardware

Replacement Alloy HGR (HG-Road) Freehub Body, with Anti-Bite Technology, for all HEX Rear Hubs. Includes spacer ring to also allow the use of MTB cassettes. Compatible with: - All HEX J-Type, Straightpull, and Gravel rear wheels Not compatible with: - SPIKE/OOZY/SPOON hubs

Origin-8's Pro Pulsion Alloy Road Crankset is made of light and durable forged aluminum with 53-/39-tooth CNC-machined aluminum chainrings. This fine 9 speed-compatible crankset provides excellent power transfer and smooth shifting.

- Forged AL6061 alloy pedal body - CNC-machined chromoly spindle - LSL sleeve bushing and sealed bearing - Adjustable tension (80~140kgf-cm) - Look Keo compatible cleats with 4.5° float - 86.5mm x 77.5mm - 325g pair - Size: 9/16" - Cleat Type: Look Keo - Style: Single Sided

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - Size: 29" - Model: Bolt Alloy MTB DH - ISO: 622 - Width ID: 30 - Width OD: 35 - Profile: 21.5 - Wall: Double - Side: Disc - Drill: 32 - Valve: Presta - Weight: 550g - ERD: 594.4

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Available in 2 profile options - Tubeless ready - Disc brake only - Sleeved joint - ISO-Road certified Specs: - ISO: 622 - Wall: Dbl - Side: Disc - Valve: Pv - Tire Compatibility: Tubeless Compatible High Profile: - Width ID: 19 - Width OD: 22.6 - Profile: 30 - Weight: 400g - ERD: 577 Low Profile: - Width ID: 17 - Width OD: 22.3 - Profile: 22 - Weight: 410 - ERD: 594

A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - Size: 29" - Model: Bolt Alloy MTB AM - ISO: 622 - Width ID: 27 - Width OD: 31.8 - Profile: 21.5 - Wall: Double - Side: Disc - Color: Black - Drill: 32 - Valve: Presta - Weight: 530g - ERD: 594.4

Lezyne's Alloy Floor Drive Pump features a durable CNC-machined aluminum barrel and base. Varnished wood handle with aluminum junction and steel piston. Oversized 3.5-inch precision gauge. 220 psi max. Extra-long, high-strength hose with aluminum couplers. Tough anodized high-polish finish. - ABS2 equipped

SDG Duster MTN Performance Mountain Saddles. Rugged and durable, offers all-day comfort. - Ideal for: All Mountain, Trail, Enduro - Utilizing the deep "Peri-Canal" which enables fore and aft movement without pressure in the perineum region - Flat and squared off nose to extend ease of movement to the front of the saddle - Plush Mid-Density EVA foam and nylon fiber composite base with D2 Edge - Flex that provide softened edges for optimal pedal strokes - 2pc microfiber top with aramid sides - Rail Material: Titanium Alloy - Clamp Style: Standard Rails - Material: Synthetic - Length: 285mm - Width: 140mm - Weight: 285g

Built for performance and all-day comfort. - Free Float Comfort Flex-position of rail inserts to increase wing flex and rider comfort, while enhancing pedaling efficiency - Platform designed to minimize pressure on both perineum & sit bones - Allows free movement on the saddle to shift weight around in aggressive riding positions - Pronounced center channel on the saddle to ensure pressure relief - Cutout in the base to provide extra perineum comfort - Provides extra support to ensure optimal power transfer - Provides extra support when shifting to the front of the saddle when climbing - Extra tire clearance for modern 29ers at full compression - Rail Material: Titanium Alloy - Clamp Style: Standard Rails - Material: Synthetic - Length: 270mm - Width: 138mm - Weight: 230g

- STW ST1 26.5mm wide alloy rims - Chrome plate steel 3/8" flatted axle. Compatible with 5/16" forks - Alloy wheels use 14G UCP spokes with 5/8" brass nipples

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - Size: 29" - Model: Bolt Alloy MTB XC - ISO: 622 - Width ID: 25 - Width OD: 29.8 - Profile: 21.5 - Wall: Double - Side: Disc - Drill: 32 - Valve: Presta - Weight: 485g - ERD: 594.4

• 6/7/8-speed MTB crankset • Square taper interface • Alloy arms • Replaceable steel chainrings • Does not include BB • Bolt Pattern: 104/64 x 4-bolt