Lighting

X8 Front Light: - High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

- Combo set featuring a 32 lumen front light paired with an 8 lumen tail light - 2 modes each, constant and flashing - 4 CR2032 batteries included - Water resistant design - Multi fit silicone rubber strap attachment

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

The LED Laser Drive rear light enhances nighttime safety by projecting "lanes" on the road behind you. Two laser lines establish your presence by creating a lane that shows motorists where you are and where you're headed. Two solid modes and five flashing modes ensure you're always seen, and recharges are made convenient through USB. Silicone rubber mounting strap included.

The Lezyne Zecto Drive Front is a compact safety light with three LEDs designed with a lightweight and sturdy Composite Matrix and CNC-machined aluminum body. It delivers a highly visible 250 lumens in Daytime Flash Mode. The Intelligent Power Indicator allows the user to check the power level at any time, and provides Side Visibility, allowing 180 degrees of visibility and increases user safety. It can recharge any time with a Micro USB cable for ultimate convenience. The light easily attaches via its Clip-On System, providing for versatile strapped or clipped mounting. The Lezyne Zecto Drive Rear complements its Front counterpart perfectly, delivering a highly visible 80 lumens in Daytime Flash mode. The Intelligent Power Indicator allows the user to check the power level at any time, and provide Side Visibility, allowing 180 degrees of visibility and increases user safety. It can recharge any time with a Micro USB cable for ultimate convenience. The light easily attaches via its Clip-On System, providing for versatile strapped or clipped mounting. The dedicated rear design points upward to ensure light is directed straight back.

Be safe with NiteRider's Stinger Taillight! This small, easy to install and remove safety light has a powerful 1/2 watt LED that keeps you visible to others. Two modes (steady and flashing) let you choose the amount of light needed for your commute. Plus, it easily mounts to almost any seatpost with the included rubber strap.

The TL 5.0 SL has five ultra bright LED’s with four different operating modes, including three different flash modes. New for 2015, the amber Side Lights help to provide even more visibility from the sides of the rider. The TL 5.0 SL will help keep you safe and seen from behind (180 degree visibility). The TL 5.0 SL operates on 2 AAA batteries (included) for up to 100 hours on flash. - 5 Ultra Bright LEDs - A wearable safety light – clip onto various straps, belt loops, etc. - 100 hours run time - Budget-friendly quality light - Eye catching flash mode patterns - 4 operating modes - Runs on AAA batteries - FL 1 Standard IP64, water resistant WARRANTY The TL 5.0 SL is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries

Nip 800’s powerfully focused beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Nip features an optimized reflector and amber side lighting for 180 degrees of protective visibility. Designed to integrate into popular 6-18V on-board batteries such as Shimano or Bosch systems, multiple mounting options creates the perfect e-Bike lighting solution. Key features: - 800 lumen headlight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee

This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Clothing clip for mounting CatEye safety lights.

USM-600 E-Lume 600 Lumen Headlight - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable UTM-60 Cosmo 60 Lumen Tail Light - 270 Degree High Visibility Design - Highly Adjustable Mounting System - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable

Replacement mounting bracket for Serfas tail lights. - Fits TL-411 & TL-200 models

Mid Cobber Twinpack Front and Rear lights produce an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, these bike lights are brilliantly effective at attracting attention and helping keep you safe on the road. Packing 320 lumens for the front and 170 lumens for the rear, the Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best front and rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Integrated USB plug: No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g

The perfect bike headlight for city riders that want premium features with an entry-level price. High visibility is prioritized and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating—meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. Recharging is fast and efficient with the included Micro USB cable. All the innovative safety features of the premium Vis Lights with a value-based price, Vis 500 is the leader in its class. Key Features - 500 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - Daylight visible pulse mode keeps cyclist safe without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings to achieve long runtimes for extended rides - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure - water immersion - Charging is reliable and simple with included Micro USB cable Tech Specs - Lumens: 500 (high), 250 (medium), 125 (low), 125 (pulse) - Runtime (minutes): 90 (high), 180 (medium), 360 (low), 720 (pulse) - Beam Angle: 20° (Spot) - Charge Time: 270 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 121 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

- Modes-Output: High-1000 lumens/Mid-200 lumens/Low-100 lumens/Flash/Fast flash - 200m visibility - Anti-glare - Cree XHP50.2 LED - Side lights - IPX5 water resistance - 3400mAh Li-ion battery w/low power indicator - Run time: High-4hrs/Mid-7.5hrs/Low-15hrs/Flash-8.5hrs/Fast flash-3.5hrs - Charging time: 3.5hrs - Includes charging cable and quick release mounting bar clamp - CE, ROHS certification - 32.3x98.5x106mm, 85g

- 2 super bright LEDs per light - Soft yet durable silicon casing - Never worry waterproof design - Universal rubber bracket

It sees what you can't. Varia RCT715 rearview radar with camera and tail light continuously records your ride and automatically saves footage before, during and after events if it detects an incident. The bright tail light makes you more visible to motorists. And Varia RCT715 integrates seamlessly with your Garmin bike computer or the Varia mobile app on your paired compatible smartphone to alert you to traffic as you ride. The app allows for live video viewing for camera setup, plus video transfer so you can replay footage postride. A selection of operation modes lets you flex camera and tail light features to maximize battery life for longer rides.

Lezyne Stick Drive Taillight: Innovative cycling taillight featuring an integrated machined aluminum Ø35.4 MM seat clamp. By replacing the seat clamp with a slender, lightweight design, the Stick Drive Seat Clamp reduces hardware and saves space—ideal for mountain bikes with dropper-style seatposts. Eight high-powered LED emitters offer top visibility and seven output modes, including a daytime flash mode (up to 30 lumens) and our Wide-Angle Optics for up to 270-degree of visibility. An innovative magnetic interface allows the light to easily detach from the mount for quick and easy charging accessibility. The light itself is housed in a co-molded Composite Matrix body that’s durable and features an IPX7 waterproof rating. A built-in USB stick allows for cable-free charging and up to 23 hours of runtime. - 30 lumen - USB rechargeable - 34.9-35.4mm seat clamp mount with magnetic clip - 2 solid and 5 flash modes

Lezyne Ebike Classic Stvzo E800: A highly advanced StVZO certified e-bike cycling headlight. This light is housed in a beautifully machined aluminum body with computerized thermal management to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—500 lumens or 800 lumens—on-the-go via a handlebar mounted button. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w LB / 13w HB. Download the manual below for further installation and compatibility details. - 500 lumen front ebike light with 800 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount

Lezyne replacement mounts for ebike lights.

FRONT LIGHT: Elevate your cycling experience with the Micro Drive 800+ Front light. Whether you ride recreationally or in challenging conditions, this is your visibility solution. With eight LEDs, this light is engineered for maximum efficiency and runtime, providing the best beam pattern for optimal visibility in even the most challenging conditions. Six different output modes, including Daytime Flash, 800 lumens max output, and a 35-hour runtime on femto mode, ensure you're prepared for any circumstance. The light's waterproof USB-C charging(cable not included) and CNC-machined aluminum construction with cooling fins provide durability and convenience. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. The fresh optical design, optional GoPro mount compatibility, and Infinite Light Power Pack+ compatibility offer versatility and enhanced performance. Customize your lighting experience for your unique lifestyle with the Micro Drive 800+ Front light. REAR LIGHT: Experience the next level of cycling safety with the Strip Drive 300+ Rear light. This exceptional rear light offers ten LEDs and a maximum output of 300 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. With seven output modes, including highly disruptive Daytime Flash modes, wide-angle optics providing 270° visibility, USB-C waterproof charging(cable not included), and a lightweight yet durable co-molded design, it's the ultimate choice for every cyclist. A versatile mounting system attaches to aero or round seatposts and recharges via a waterproof USB-C connection. - Front Light Max 800 lumens / 35-hour max runtime - Front Light Max 800 lumens / 35-hour max runtime - Waterproof USB-C charging port with charge indicator - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - Daytime Flash mode with Highly Disruptive Pattern - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity - Rear Light Max 300 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Lightweight and durable co-molded design - Maximum side visibility design - Multiple mounting options with ladder strap - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

The AMPP 1100 uses a compact twin-LED design with OptiCube lens technology spreading a wide and even beam across whatever the terrain throws at you. FEATURES: - High power rechargeable headlight (1100 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Compact and robust alloy body with composite battery casing - Large-capacity lithium-ion rechargeable battery - Built-in fast recharging circuit *Full charge in approximately 3 hours (minimum) - 3-level battery indicator (Blue: above 50% | Yellow: 30-50% | Red: Less than 30%) - USB rechargeable (Micro USB cable included) - Mode memory function - 5 light modes: High, Middle, Low, Daytime HyperConstant, Flashing - Double click to turn on High mode - FlexTightbracket - Water resistant - Optional helmet mount MODES/RUN TIME: - High mode: 1100 lumens | 1.5hrs - Middle mode: 800 lumens | 2hrs - Low mode: 400 lumens | 4.5hrs - Daytime HyperConstant mode: 1100/400 lumens | 6.5hrs - Flashing mode: 200 lumens | 50hrs Dimensions/Weight: - 48 x 105 x 34 mm - Weight: 200 grams (light unit and battery) Light source: - High intensity white LED X2 - Battery: li-on rechargeable battery (7.4V-2500mAh) Optional Parts: - Center Fork Bracket (5342440) - Helmet mount (5341831N) Recharge time: - Approximately 3-5hrs (USB2.0 recharge) - About 300 recharge times (until rated capacity drops to 70%)