Cane Creek

The DB Kitsuma shock was designed to be very intuitive and easy to use for the rider, on and off the trail. It boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. - Three Position Climb Switch provides three distinct modes, drastically affecting the shock's feel and character. The new three position climb switch retains the "Descend" and patented "CS" mode, while adding a new "Firm" mode - Tool-Free adjustments are ergonomically designed to be easily accessible and adjustable trail-side—giving riders the power of a pro-tune at their fingertips - The rebound range has been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes

The eeBrake G4 is the fourth generation eeBrake featuring 100% CNC machined parts and a wider design optimized for 22-28mm rims. It features a stiffer black arch spring, a revised one-piece center adjuster with built-in resistance for easier use, and ghosted laser etching that will stand the test of time. All with the same stopping power and light weight that you've come to rely on from eeBrakes. - The eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation - The cross cable path aligns the brake cable over the center of the brake which provides a clean and aerodynamic line, moving the cables into the "wind shadow" of the frame - Tool-free caliper centering adjustability provides super-precision and pad motion consistency - One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire, allowing for easy wheel removal - Optimized to work with Shimano, Campagnolo, and SRAM levers

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

We’ve fit the same outstanding stiffness, durability and weight savings of the eeWings mountain cranks into the slimmer road bottom bracket standard. This includes road, gravel and cyclocross configurations. - eeWings All Road 170mm, 172.5mm or 175mm - 30mm Spindle - 10 Year Warranty"

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS41/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 41.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 1mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Weight: 24.91g

The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS56/30/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 88g

Replacement clamp kit for Thudbuster G4.

Replacement bushings for Cane Creek shocks.

The Ancora Expansion Plug is designed for use with carbon steerer tubes. Machined Aluminum expansion wedges paired with a knurled sleeve ensure a secure fit with the correct preload amount. - Accepts any standard preload bolt and top cap (sold separately) - Insertion length: 46mm - Contact surface length: 38mm

Replacement seals for servicing Cane Creek rear shocks.

Thudbuster 3G Elastomer

Thudbuster 3G Elastomer

Thudbuster 3G Elastomer

The Cane Creek Helm MKII Coil Suspension Fork features an upgraded damper design for increased support and control. - Compression and midvalve circuit offer increased support and control - SKF oil seal head cartridge and wiper seals are low friction - Damping features include: high speed compression, low speed compression, low speed rebound - Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), low speed rebound (10 positions), indexed travel adjust system, spring pre-load adjust - Lightweight coil spring - 55 lb Lightweight Coil Spring included from factory

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

- Color-matched aluminum Interlok Spacer for Cane Creek headsets

110-Series Alloy Interlok Headset Spacer - Aluminum construction

Helm MKII Coil - Designed, Developed, Hand-Built By Riders The Helm MKII is Cane Creek's first major revision of the Helm fork lineup and improves on its predecessor in nearly every way. It includes a newly designed damper featuring a new compression and mid-valve circuit for increased support and control while a new SKF oil seal head and 2.5 weight damper oil reduce friction and provide a more supple ride-feel. The HELM MKII Coil includes all of the innovative features of the original HELM Coil fork including rider-adjustable travel which allows HELM MKII owners to change the travel of their fork at home with just a few common tools. SKF LOW-FRICTION WIPER SEALS: -The fork includes low-friction SKF wiper seals on the castings. These seals are typically seen as an after-marketing upgrade on most suspension forks, however they are a stock feature on the HELM MKII. Accessory Free Travel Change: -No additional accessories or parts are needed to change travel lengths on all Helm MKII Coil forks. Updated Damper: -The updated damper features a new compression and mid-valve circuit for increased support and control while a new SKF oil seal head and 2.5 weight Motorex damper oil reduce friction and provide a more supple ride-feel Spring Recommendations -35lb spring – AAG0421 RED – (90-120lbs rider) -45lb spring – AAG0422 BLACK – (120-160lbs rider) -55lb spring – AAG0424 GREEN – (160-200lbs rider) ** Stock Spring in Helm Coil -65lb spring – AAG0426 BLUE – (200-240lbs rider)

This is the Short Top Cover for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset. - For 1 1/8-inch fork/headset - Stack height: 8mm - 53 grams

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. - Enduro XD-15 ceramic ball bearings are made from pure silicon nitride material with extreme high density and uniform compaction - The race material is an advanced stainless alloy that is nitrogen infused and will not rust or corrode - Dual stage anodize black and gold machined aluminum bottom bracket cups - Kluber NBU52 grease runs better and smoother with time and is highly resistant to being washed out - Designed for use with 30mm spindles

Cane Creek eeBarKeep bar end plugs weigh in at only 6 grams each and were designed with both flat and drop-bar applications in mind. - Material: Aluminum

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1.5-degrees so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets