Free Shipping on Orders Over $50 Within Continental USA

Free Shipping on Orders Over $50 Within Continental USA

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Flat Pedals

Crank Brothers Stamp 11
$306.25
Size-specific, premium concave platform pedal provides optimal shoe/pedal interface. - Titanium spindle for weight reduction - Optimal surface area - Minimal profile: 11mm-13mm thin - Concave platform for secure foothold - 10 adjustable pins per side for grip - Premium bearings and seal system - Stamp Small: Recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp Large: Recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Spindle material 6AL/4v titanium - Body material: 6061-T6 aluminum - Footprint: 100mm x 100mm (Small)/114mm x 111mm (Large) - Weight: 299 grams per pair (Small)/325 grams per pair (Large) - Adjustable pins 10 per side
Hope F20 Platform Pedals
$200.40 - $213.50
• Pedals feature a fully CNC machined platform out of 2014 T6 aluminium with anodized finish • The axle is made of high strength Cr-Mo, heat treated and plated • The platform is slightly concave in shape to give maximum support • Each pedal uses a norglide bushing and three cartridge bearings in a fully sealed chamber to give a long smooth life • Replaceable pins per pedal provide excellent traction and grip. (Titanium and hollow pins available)
Race Face Atlas Platform Pedal
$179.99
• Low-profile, lightweight, wide aluminum body with double-concave platform. • Platform size: 101x114cm • 4 Full sealed cartridge bearings per pedal • Super thin double concave wide platform • Hex-head threaded pin design offers more bite for added security • Fore and aft angled bottom-loading pins • Hidden pin / Grease access port • 20 SHCS hex traction pins per pedal
Shimano PD-M828 Saint Flat Pedals
$179.99
Shimano's Saint Flat Pedals are high-end power platforms with superior grip, beefy durability, and race-ready customizabilty. - Fore-aft concave - Virtual concave with 5 mm pins at edge and 4 mm pins at center - Superior grip for aggressive gravity riding - 105 mm x 109 mm wide platform for more stability and comfort - Newly designed slimmer axle saves weight without sacrificing the strength - 2 pin length options: long and short - 12 pins per platform - Weight: 553g
45NRTH Helva
$178.20
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig.
Crank Brothers Stamp 7 Pedals
$150.00 - $161.98
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Chromag Scarab Platform Pedals
$151.18
At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair
Chromag Contact Pedals
$125.00 - $136.78
Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.
Spank Oozy Trail Pedals
$129.00
- A super slim 12mm for maximized pedal clearance, weight optimized trail pedal at 360g per set. - Forged alloy body is shot peened and anodized for increased durability - Equipped with forged hollow taper chromoly steel axles for unmatched strength - Sealed bearings, IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip and stability on trails - KEY TECHNOLOGIES: MGR, industrial grade axle assembly, chamfered leading edges - MATERIAL: Forged MGR alloy body, CNC optimized - PLATFORM SIZE (mm): 100 x 100 - PLATFORM PROFILE (mm): 12 - WEIGHT (g): ±360 / Set - AXLE: Cold forged chromoly steel - BEARING / BUSHING Full complement industrial sealed bearing, IGUS bushing - PINS: 18 steel pins (per pedal) - virtual concavity configuration - FINISH: Shot peen anodized, CNC logos
Spank Spike Flat Pedals
$127.94 - $128.92
The original game changer! SPANK Industries' SPIKE Pedals changed the world's concept of the benefits a flat pedal can offer and set the benchmark for top of the line value. The SPIKE Pedal's svelte 12mm thin forged alloy body not only maximizes pedaling clearance, but also grip and stability, by placing the rider's foot closer to the pedal axle. Equipped with forged hollow-tapered chromoly steel axles, SPIKE Pedals offer unmatched ultimate strength at just 420g per set. 20 steel pins in a virtual concavity configuration offer supreme grip without compromising platform thickness. Oversized industrial sealed bearings and IGUS bushings guarantee exceptional durability and performance. Often imitated, the SPIKE's CNC chamfered leading edges deflect impact forces and bring and instantly recognizable edgy aesthetic that always turns heads. - 12mm thin - Massive 100x100mm platform - ±420g/set (with full pin complement) - Cold forged, CNC optimized alloy pedal body - Cold forged chromoly steel axle - Chamfered leading edges for improved clearance and reduced impact forces - Chamfered side edges for improved cornering clearance - Oversized sealed full compliment inboard industrial bearing - Sealed outboard IGUS bushing - 20 adjustable pins per pedal - Full sized hex head pins improve durability and maintenance - Inboard friction seal prevents contamination and reduces unwanted pedal spin
Race Face Aeffect Platform Pedals
$119.99
• Thin platform, concave aluminum body with bottom loading pins. • Shorter spindle design shaves weight. • Thin concave platform • Reduced spindle length saves weight • Hex-head threaded pin design offers more bite for added security • Hidden / Grease access port for extended life • Platform size: 101x100cm • Cartridge bearings and DU bushings • 20 SHCS hex traction pins per pedal
45NRTH Heiruspecs
$112.10
A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig.
Crank Brothers Stamp 3
$100.02 - $111.13
Size-specific elite-level platform pedal provides optimal shoe/pedal interface. - Optimal surface area - Minimal profile 16mm thin - 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU) Specs: - Spindle material: Forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Footprint: 114mm x 111mm - Adjustable pins: 10 per side - Weight: 455g per pair - Warranty: 5 years
Fyxation Mesa 61 Alloy Thin Platform Pedals
$109.72
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders -Durable 6061 alloy construction with 20 replaceable traction pins (10 per side): 13.3mm height/105mm width - CrMo spindle axle with a smooth running, sealed inner DU bushing/dual-outer sealed bearing system - Weight: 380g
VP Components VP-69 Pedals
$100.23
VP's 69s are the perfect DH race, freeride, trail and BMX pedals. They are optimized for sticky shoes with 6 pins (VP's tallest and sharpest) per side on concave platforms that also grip your soles. These trick pedals boast extruded and CNC-machined aluminum bodies, tough chromoly axles and sealed bearings for long life. The bodies are built to withstand rock strikes without losing pins, too.
VP Components VP-Vice Pedals
$100.23
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability.
Bontrager Line Pro MTB Pedal Set
$99.99
Grippy, durable flat pedal for trail and park use. Find it. Rip it. Choose your line Flat pedals are the preferred choice of downhillers, dirt jumpers, and enduro riders, but any trail rider can reap the benefits of a pedal born from the demands of those elite riders. A curved body and solid platform with traction pins mean that every time you place your foot, your shoe stays put. Lift off at any moment knowing you can stamp back down on the gas and find firm placement. Product details - Dial in your preferred traction with tuneable pin placement and contact height - Durable axle spins on sealed cartridge bearings - Pedal body is made from 6061-T6 aluminum
Shimano Deore XT M8040 Flat Trail Pedal
$99.99
Shimano Deore XT M8040 Flat Trail Pedals offer legendary performance and durability. - Superior grip for aggressive trail riding - Fore-aft concave - 10 pins on each side - Optimized platform size - 2 body size options (also means different Q-factor) - S/M: 100mm x 105mm, for 36-43 shoe - M/L: 110 x 115mm, for 43-48 shoe - 2 pin length options : long & short - Pedal System: Flat Pedal - Average Weight: S/M size 469 grams, M/L size 514 grams
Xpedo Spry Pedals
$94.98 - $95.00
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
Spank Spoon Pedals
$94.90
SPANK Industries set out to make the perfect pedal for every rider, and the SPOON Pedals offer three platform width options for riders of any age or foot size. The SPOON 90 Pedals are the perfect solution for younger riders and many women who have compromised ideal support and grip with traditional size flat pedals. SPANK SPOON 100 Pedals are ideal for riders with average sized feet who want a flat pedal upgrade that won't break the bank. The extra wide pin pattern on SPANK's SPOON 110 Pedals spread load around the perimeter of large sized shoes, offering more predictable grip and enhanced support over traditional size flat pedals. Each SPOON pedal sports a 16mm-12mm concave profile lined with 20 steel pins, as well as a forged chromoly axle which delivers the strength and durability SPANK pedals are famous for. - SPOON 90 Pedals: US Men size 6 (Euro 39) and under; ±360g /set - SPOON 100 Pedals: Men sizes 7 to 10 (Euro 39-44); ±400g /set - SPOON 110 Pedals: US Men sizes 11 (Euro 44) and up; ±420g /set - Industrial grade axle assembly - Chamfered leading edges - MGR extruded, CNC optimized alloy body - 12-16mm concave platform profile - Cold forged chromoly steel axle - Industrial sealed bearing and IGUS bushing - 20 steel pins per pedal - Shot peen anodized finish with laser logos - Available in Black, Red, Blue, Green - Suitable for Kids, Race, Freeride, Trail
Crank Brothers Stamp 2
$87.38
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. - Optimal surface area - Minimal profile 16mm thin - 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU) Specs: - Spindle material: forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Footprint: 114mm x 111mm (Large); 100mm x 100mm (Small) - Weight: 470g per pair (Large); 415g per pair (Small) - Warranty: 5 years
VP Components VP-001 Flat Pedals
$85.00
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability.
Xpedo Traverse 6 Pedals
$81.90
- Weight: 250g  - Body: 6061 CNC Aluminum  - Spindle: CroMo - Bearings: 3 Cartridge  - Cages: 6061 Aluminum  - Size: 77.2x81x21 (mm)
Chromag Synth
$68.44 - $81.88
Light, impact resistant. New for 2018 is the Synth Pedal. An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank. Modeled after our Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system. It uses the same high-end axle and bearing assembly as on our Scarab and Contact models so you can count on long-life and smooth performance, with common serviceability components available from Chromag.
Shimano PD-GR500 Multi-Purpose Flat Pedal
$79.99
Get rad without getting broke. This Multi-Purpose Flat Pedal from Shimano has a wide platform and adjustable pin height to dial in the perfect amount of grip for your preference and riding conditions. - 3 different pin height settings to match different type of riding - 9 pins per platform - Highest setting is+5 mm higher than PD-MX80's pins - Weight: 533g
Spank Spoon DC Pedals
$79.90
- Large platform size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body in eight color options - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance - Material: Alloy - Platform Size (mm): 100 x 105 - Platform Profile: (mm) 16mm - Weight (g): ±395/set - Axle: Cold-forged Chromoly steel - Bearing/Bushing: Industrial bearing, IGUS bushing - Pins: 12 steel & 8 alloy pins per pedal - Virtual Concavity - Finish: Mottled / grunge anodized
Xpedo Detox Pedals
$79.00
- Weight: 340g - Body: Magnesium - Spindle: CroMo - Bearings: 1 Cartridge - Bushings: 1 DU - Pins: 40 Volcano pins per pedal - Size: 100x98x18 (mm) - Colors: Gold, Black, Red, White
Sun Ringle Zu Zu Pedals
$71.40
- Alloy Cage - Replaceable Cleats - Sealed Bearing - 300g (each)
All-City Cecil Pro Pedals
$63.80
The Cecil Pro Track pedal was named for a Minnesota local legend who operated the Shakopee Velodrome in the 70’s and early 80’s. It's a traditional sealed-bearing, low-profile track pedal and was designed to accommodate single toe straps. - Pedal spindle: 9/16-inch - Pedal type: toe clip compatible - Spindle material: chromoly - Weight: 238 g - Cage length: 78mm - Cage width: 59mm - Height: 14mm, 26mm
All-City Wallner Pro Pedal
$63.80
• Sealed Bearings • Ability to use 6mm hex or 15mm pedal wrench • M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Dual sided
Fyxation Mesa MP Nylon Thin Platform Pedals
$63.43
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with 16 replaceable, metal-pin traction pins (8 per side): 13.3mm height / 105mm width - CrMo spindle axle with a smooth running, sealed inner DU bushing / dual-outer sealed bearing system - Weight: 350g
Fyxation Mesa Nylon Thin Platform Pedals
$59.38
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction: 13.3mm height/105mm width - CrMo spindle axle with a smooth running, sealed inner bushing/dual-outer sealed bearing system - Weight: 315g
VP Components VP-Vex Dual Concave Aluminum Pedals
$57.09
VP's Vex Pedals are incredible workhorses with sturdy, large platforms and a dual-concave design with pins for an awesome grip. They're also light making them ideal for mountain biking, freeriding, BMX and even city riding. They're built to last, too, with cast-aluminum bodies, tough forged, heat-treated and CNC-machined chromoly axles and quality sealed bearings.
Dimension Mountain Pro Pedals
$55.00
Dimension Mountain Pro Pedals. - Forged aluminum body - Sealed bearings - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 270 g
Odyssey OG/PC Pedals
$50.80
A huge leap forward in pedal technology that results in a simpler overall design. Extremely lightweight plastic bodies eliminate the need for bearings and allow for a spindle that is significantly stronger than normal. Metal pins make the pedal very grippy, and the pedal will still function normally when pins are removed from one side for grind tricks. No flimsy outboard end caps. Pedal body halves are easy and inexpensive to replace – instead of replacing the whole pedal. - 9/16-inch, heat-treated, 4140 chromoly spindle - Proprietary high-strength plastic composite
Bontrager Line Elite pedal
$49.99
MTB flat pedals with a durable nylon design and replaceable pins for consistent grip. Confident and durable Most downhillers, dirt jumpers, and enduro riders prefer flat pedals, but any trail rider can appreciate the benefits of the Line Elite MTB pedal. It features a durable nylon body and solid platform with replaceable traction pins, so every time you place your foot your shoe stays put. It also has a durable axle and sealed cartridge bearings to ensure lasting performance. - Durable nylon body with a proven shape for comfort and confidence - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with either 6mm hex or standard 15mm pedal wrench
Crank Brothers Stamp 1 Large
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Stamp 1 Small
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Race Face Chester Pedal
$49.99
A new addition to the Race Face flat pedal line up: the Chester Pedal. This tough and burly nylon composite body provides a large platform with the same grip as traditional alloy pedals via the bottom loading 8 hex traction pins per side. Thin and lightweight is the name of the game with Chester, featuring a cro-mo axle that is fully sealed and a 100% serviceable bearing and bushing system. This pedal offers great performance for a wide range of riders at a price that leaves plenty of cash in pocket to spring for that round of bevies at your local watering hole after hammering out a day of hot laps with the crew. - Nylon composite body - Replaceable steel pins (8 per side) - Fully sealed - Serviceable - Smooth and durable sealed bearing and bushing system - Cro-mo axle - Thin and lightweight concave platform - Large platform with same grip as traditional pedals
Odyssey Grandstand Alloy Pedals
$45.98
The Grandstand pedal features a unique slim profile, a wide platform and a comfortable concave that feels exceptional as soon as you set foot on it. All of Odyssey's pro riders have been after them since the first samples came in. The pedal features a unique bearing configuration that allows a big spindle to be paired with a slim pedal body. The metal version includes 8 durable and replaceable steel pins per side. - 9/16” only
Fyxation Gates Slim Nylon Platform Pedals
$35.17 - $42.44
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives: 15mm height/100mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 345g
MKS GR-9 Road Platform Pedals
$41.38
- Street platforms with one-piece alloy body - Great for use with soft-soled street shoes - Toe clips and straps required (single strap only)
DMR V-8 Pedals
$39.08
- Aluminum body, steel axle with precision ground adjustable bearings - Features grease ports, injection syringe included - 4 replaceable traction pins per side - 528g
Bontrager Satellite City Pedal
$29.99
Comfort and Confidence The inForm BioDynamic design of the Satellite city pedal delivers ultimate pedaling comfort. The wide, stable platform is designed to support your foot while you're pedaling, and the grippy texture provides confident traction to keep you going. Reflector wrap on each pedal ensures all-around visibility. - Large, concave platform for support and stability - Anti-slip texture for traction and confidence - 270-degree reflectivity for all-around visibility - inForm BioDynamic design for comfort and support while pedaling
All-City Standard Track Pedal
$29.90
• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design
Fyxation Gates Nylon Platform Pedals
$27.58 - $28.01
- Classic BMX style platform pedal for all-around use across varied disciplines - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives: 22.5mm height/105mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 405g
Dimension Cruiser Pedals
$27.50
Dimension Cruiser/Comfort Pedals. - Forged aluminum platform-type body with slip-resistant surface and built-in reflectors - Platform size is 105.5 x 74mm - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 448g
Dimension Mountain Compe Pedals
$27.50
Dimension Mountain Compe Pedals. - Forged aluminum body - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 335g
Odyssey Grandstand PC Pedals
$27.35
The Grandstand pedal features a unique slim profile, a wide platform and a comfortable concave that feels exceptional as soon as you set foot on it. All of Odyssey's pro riders have been after them since the first samples came in. The pedal features a unique bearing configuration that allows a big spindle to be paired with a slim pedal body. - Genuinely Thin Body. - 17mm at center with uninterrupted dual concave. - Foot-sized 105mm wide. - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach. - 8 oversize plastic pins per side. - 9/16” only.
Odyssey Triple Trap Pedals
$24.99
Odyssey's been making these pedals longer than you've been alive and no one does it better. The wide alloy body and cage put the kung fu grip on your waffles, and radiused outside corners offer better clearance, Clarence. Thread 'em on your classic cruiser or track whip, get yourself some snacks, and slay the dirt dragon with a Triple Trap attack!
Odyssey Twisted Pro Pedals
$16.99 - $22.99
While staying true to the original Twisted PC’s style, the Twisted PRO offers a significantly larger body shape, slimmer height and more concave while still being built around a traditional loose-ball bearing configuration. Features: - High-strength Nylon composite - 12 oversize pins per side - Traditional loose ball bearings - Chromoly spindle - High-strength plastic composite - Wider & longer pedal body - Larger concave area - Slimmer profile Specs: - 9/16-inch spindle - 104mm Width - 98mm Length - 14.6 oz (pair)
Dimension Mountain Sport Pedals
$22.00
Dimension Mountain Sport Pedals. - Molded nylon pedal body - Accepts toe clips - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly - Weight: 290g
Dimension City Pedals
$17.25
Dimension City Pedals. - Built-in reflectors, will not accept toe clips - Molded nylon; 1-piece, caged-type pedal - Slip-resistant surface
Odyssey Twisted PC Pedals
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Dimension Mountain Basic Heavy-Duty Pedals
$15.00
Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g
Dimension Junior Pedals
$12.00
Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)
Electra Barefoot Pedals
$9.99
If your favorite ride leads to the beach or perhaps the grass at the local park, Electra's Barefoot Pedals are here. They feel the same way with their foot-friendly platforms and comfy plastic bodies. Treat your feet to smooth comfort with these durable platforms.
Page 1 of 1