Wheels

Upgrade or refresh your Bontrager wheels. - Original equipment replacement axle for Bontrager Rapid Drive 108 hubs - A complete rebuild of all hub internal parts is recommended when replacing axle

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Sealed stainless Steel cartridge bearings - Hub shell machined from forged aluminium billet - Standard 6 bolt disc fitting - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in both standard 15mm, 20mm and Torq end cap options - Hub flanges are moved outboard 5mm compared to the standard 100m front hub to increase wheel stiffness - Available Black, Silver, Bronze, Red, Blue, Purple and Orange - Available in 24, 28, 32 and 36 hole drillings - Machined from forged 2014 T6 Aluminium billet - Conversions available for 15mm Boost, 20mm Boost and Torq **Note**Boost 110mm front hub uses a different, wider hub body compared to the standard 100mm front hub

Key Features - Sealed stainless Steel cartridge bearings - Hub shell machined from a single forged aluminum billet - Standard 6 bolt disc fitting - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in 135, 142, and 150mm width FDS - Weight: 255g

Key Features - 10, 11 and 12-speed compatible - Sealed stainless Steel cartridge bearings - Hub shell machined from a single forged aluminum billet - Standard 6 bolt disc fitting - 4 Pawl ratchet system with 44 tooth engagement (8.2 deg) - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in 170/177 and 190/197mm widths (specific hub shells)

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings....And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels. Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. Features >> Improved sealing to stop dirt ingress and to reduce drag >> New Labyrinth seal has zero drag for incredible freewheeling performance >> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. >> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design >> Wire cut pawls from high strength steel for maximum strength. >> New step down axle design for a stiffer more durable freehub >> New hub body profile for increased stiffness without adding weight >> Ebike Specific hub designed for the demands of ebikes >> Fully serviceable and rebuildable with simple tools >> Available in 24, 28, 32 and 36 hole drillings >> Available with all modern freehub bodies >> End spacers can be easily swapped to suit different frame and axle standards >> 6 bolt or Centrelock disc fitting

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings...And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels. Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. Features >> Improved sealing to stop dirt ingress and to reduce drag >> New Labyrinth seal has zero drag for incredible freewheeling performance >> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. >> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design >> Wire cut pawls from high strength steel for maximum strength. >> New step down axle design for a stiffer more durable freehub >> New hub body profile for increased stiffness without adding weight >> Ebike Specific hub designed for the demands of ebikes >> Fully serviceable and rebuildable with simple tools >> Available in 24, 28, 32 and 36 hole drillings >> Available with all modern freehub bodies >> End spacers can be easily swapped to suit different frame and axle standards >> 6 bolt or Centrelock disc fitting

Locks your through axle wheel - Replaces Allen key and Quick release through axles - Easy one-time installation - Coded key to install, lock and unlock - Precision made for consistent function and long life

The EWS is strict—break certain parts and you DNF. The rule’s meant to encourage sensible management of equipment, but it’s also tipped the balance in favor of toughness and reliability. Enter the Reserve 30. Its 30mm internal width supports a 2.3-2.5” tire and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. This wheel is compatible with Ebikes. Details - 29" I9 Hydra Hub: I9 Hydra Wheelset Weight: 1,811g Internal Width: 30mm Spoke Count: 28 ERD: 596mm Asymmetric Offset: 4mm Recommended Tire Width: 2.3 - 2.6 in. Driver Options: XD or MicroSpline Brake Options: 6-Bolt or Centerlock Depth: 22mm Hub Spacing: 110/148

Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it. - Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force - No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant - Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance - Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes

There are magical moments when the bike and rider become one with the trail in an almost existential state of mountain bike euphoria. Rocks and root sections disappear as you float through berms and corners, carrying maximum speed with an ease that permanently plants an ear-to-ear grin on your face. Enter the new Reserve 30|SL. At just under 1750 grams, the Reserve 30|SL is one of the lightest trail-ready wheelsets on the market, with no rider weight limit and our uncompromising lifetime guarantee. The Reserve 30|SL wheelset is built for you and the way you ride: balanced and responsive to go the distance, delivering uncompromised, untethered trail riding nirvana.

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

- Converts Schrader rims to Presta - Rubber - Sold individually

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Heavy duty and extra wide PVC rim strips for maximum tube protection.

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

Replacement Axle nuts for three speed Sturmey Archer hubs.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

- Shell: 8mm flanged axle nut - Flanged

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Parts for repair and maintenance of DT Swiss hubs.

Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!

- Replacement part for Surly hubs.

- Replacement adjustable nut for three-speed internal hubs.

- Steel end nut for QR skewers

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

• Rim strips for 20-inch fat bike rims • 80mm wide

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.